Sharp ER-A347 - Operator Maintenance; In Case of Power Failure; In Case of Printer Error

100
b
 UniversalProductCode(UPC)or
EuropeanArticleNumber(EAN)

■
UPCorEANcode
Your register can transact the following codes:
• UPC-A (Number system character: 0, 2, 3, 4)
UPC-E
• EAN-8
EAN-13 Internal code EAN-8/EAN-13 ITF-14
UPC-A
• Number system character: 0 <used in the source marking>
• Number system character: 3 <used as NDC or HRI>
For entry, a full 12 digits number or 11 digits number (omitting
the check digits) must be entered.
• Number system character: 4 <In-store marking PLU type>
For entry, a full 12 digits number, 11 digits number (omitting the
check digit), or a leading zero plus 12 digits number must be entered.
0
Maker code
Number system character
Item code
Check digit
3
NCD (or HRI) format
4
(Free code)
UPC-E
• UPC-E is a zero-suppressed version of UPC-A that conforms to the
UPC-E Standards. This code is used for marking small package.
For entry, a 6 digits number or a leading zero plus 6 digits
number must be entered.
EAN-8
• Ordinary EAN-8 code (ag: neither 0 nor 2) <used in the source
marking>
For entry, a full 8 digits number must be entered.
Maker code
Item codeNation code
EAN-13
• Ordinary EAN-13 code (used in the source marking)
For entry, you must enter a full of 13 digits number.
In case of the leading code is “977”, “978” or “979”, the code
is recognized as ISBN code or ISSN code. For the ISBN/
ISSN code, the compulsive price entry can be programmed.
Refer to the programming section “UPC Function” in “Optional
Feature Selection”.
Maker code
Nation code
Item code
ITF-14
Maker code
Nation code
Item code
P.I