Sharp ER-A347 - Special Function Programming; RA, PO, and Cash in Drawer Programming; Commission Rate Programming

57

■
RA
You can program an upper limit amount and description for received-on-account key.
Procedure
Program each item as follows:
•HALO(HighAmountLockout)(Usethenumericentry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99
•TEXT(Usethecharacterentry)
Description for the received-on-account key. Up to 12
characters can be entered.

■
PO
You can program an upper limit amount and description for paid-out key.
Procedure
Program each item as follows:
•HALO(HighAmountLockout)(Usethenumericentry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99
•TEXT(Usethecharacterentry)
Description for the paid-out key. Up to 12 characters can be
entered.

■
Cashindrawer
You can program the description and the upper limit amounts for cash in drawer (sentinel).
Procedure
Program each item as follows:
•HALO(HighAmountLockout)(Usethenumericentry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 99999999.99
NOTE
When the cash in drawer amounts exceeds a limit
amount, the sentinel mark (X) will be displayed.
•TEXT(Usethecharacterentry)
Description for the cash in drawer. Up to 12 characters can be
entered.

■
Commissionrate(Commission1,Commission2)
Procedure
Program each item as follows:
•RATE(Usethenumericentry)
Commission rate (0.00 to 999.99)
•TEXT(Usethecharacterentry)
Description for the commission rate.
Up to 12 characters can be entered.