Sharp ER-A347 - Terminal Programming; Date;Time Setting

65
TerminalProgramming
Use the following procedure to select any option included in the terminal group:
Procedure
1.
In the SETTING windows, select “6 TERMINAL.”
• The TERMINAL windows will appear.
2.
Select any option from the following options list:
•MACHINE#(Usethenumericentry)
Machine number (max. 6 digits: 0 to 999999)
•CONSECUTIVE#(Usethenumericentry)
Enter a number (max. 6 digits: 0 to 999999) that is the
desired starting number.
•GT2(Usethenumericentry)
Enter a number (max. 13 digits: 0 to 9999999999999)
•GT3(Usethenumericentry)
Enter a number (max. 13 digits: 0 to 9999999999999)
Date/TimeSetting
You can set the date and time for the register.

■
Date/time
Procedure
1.
In the SETTING window, select “7 DATE/TIME”.
• The DATE/TIME window will appear.
2.
Set each item as follows:
•DATE(Usethenumericentry)
Enter the month (2 digits), day (2 digits), and year (2
digits) in this sequence.
•TIME(24HR)(Usethenumericentry)
Set the time (max. 4 digits) on the 24-hour system. For
example, when the time is set to 2:30 AM, enter 0230;
and when it is set to 2:30 PM, enter 1430. The time will be
printed and displayed.