Sharp ER-A347 - DEPT;PLU Programming

50
DEPT/PLUProgramming
Use the following procedure to select any option included in the department/PLU/UPC programming group:
Procedure
1.
In the SETTING window, select “1 DEPT/PLU”
• The DEPT/PLU window will appear.
2.
Select any option from the following options list.
1 DEPARTMENT:
Departments
2 PLU/UPC:
PLUs/UPCs
3 PLU RANGE:
A range of PLUs
The following illustration shows those options included in this programming group.
1 DEPT/PLU 1 DEPARTMENT
l
See “Department” on page 51.
2 PLU/UPC
l
See “PLU/UPC” on page 52.
3 PLU RANGE
l
See “PLU range” on page 53.
A
a