Sharp ER-A347 - PLU Range Programming

53

■
PLUrange
You can program PLUs in the designated range.
Procedure
Enter a value or select an option for each item as follows:
•START(Usethenumericentry)
Starting PLU code (max. 5 digits)
•END(Usethenumericentry)
Ending PLU code (max. 5 digits)
•OPERATION(Usetheselectiveentry)
DELETE: Enables you to delete a specied range of
PLUs.
MAINTE.: Enables you to change the setting you have
programmed.
NEW&MAINTE.: Enables you to change the current setting
when the specied codes have already been
created or to create new codes when the
specied codes have not been created yet.