MX-M316N SIMULATION 6 – 54
46-63
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the density in the copy low
density section.
Section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the adjustment value using the 10-key.
3) Press [OK] key.
The set value is saved.
When the adjustment value is increased, reproducibility of the
background and the low density image is increased. When the
adjustment value is decreased, reproducibility of the background
and the low density image is decreased.
48
48-1
Purpose
Adjustment
Function (Purpose)
Used to adjust the scan image magnifica-
tion ratio (in the main scanning direction
and the sub scanning direction).
Section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value is saved.
When the adjustment value is increased, the image magnification
ratio is increased.
A change of "1" in the adjustment value of item A, C, or E corre-
sponds to a change of about 0.02% in the copy magnification ratio.
A change of "1" in the adjustment value of item B, D, or F corre-
sponds to a change of about 0.1% in the copy magnification ratio.
KAE_JUDGE_
LV_L_O
Color AE background
density threshold value
adjustment (upper limit)
0 - 10 0
LAE_JUDGE_
LV_C
Color AE background
detection level
adjustment (chroma)
0 - 10 5
MAE_
ONOFF_
CC
ON AE mode ON/
OFF switch:
For color copy
ON 0 - 1 0 0 (ON)
OFF OFF 1
NAE_
ONOFF_
MC
ON AE mode ON/
OFF switch:
For mono-
chrome copy
ON 0 - 1 0 0 (ON)
OFF OFF 1
OAE_
ONOFF_
CS
ON AE mode ON/
OFF switch :
For color scan
ON 0 - 1 0 0 (ON)
OFF OFF 1
PAE_
ONOFF_
MS
ON AE mode ON/
OFF switch :
For mono-
chrome copy
ON 0 - 1 0 0 (ON)
OFF OFF 1
Q BLANK_JUDGE_
LV_L
Blank judgment level
adjustment (value)
0 - 10 0
R BLANK_JUDGE_
LV_C
Blank judgment level
adjustment (chroma)
0 - 10 0
S MODE0_UNDER Mode 0 developing
paper mode select
0 - 6 0
T MODE1_UNDER Mode 1 developing
paper mode select
0 - 6 0
U MODE5_UNDER Mode 5 developing
paper mode select
0 - 6 0
V MODE6_UNDER Mode 6 developing
paper mode select
0 - 6 0
Item/Display Content
Setting
range
Default
value
A COLOR COPY :
TEXT/PRINTED PHOTO
Text print
(color copy)
1 - 9 3
B COLOR COPY : TEXT Text (color copy) 1 - 9 3
C COLOR COPY :
PRINTED PHOTO
Printed photo
(color copy)
1 - 9 5
D COLOR COPY :
PHOTOGRAPH
Photograph
(color copy)
1 - 9 5
E COLOR COPY :
TEXT/PHOTO
Text/Photograph
(color copy)
1 - 9 3
F COLOR COPY : MAP Map (color copy) 1 - 9 5
G COLOR COPY : LIGHT Light document
(color density)
1 - 9 6
H COLOR COPY :
TEXT/PRINTED PHOTO
(COPY TO COPY)
Copy document,
Character print
(color copy)
1 - 9 5
I COLOR COPY : TEXT
(COPY TO COPY)
Copy document,
Character
(color copy)
1 - 9 5
Item/Display Content
Setting
range
Default
value
J COLOR COPY :
PRINTED PHOTO (COPY
TO COPY)
Copy document,
Printed photo
(color copy)
1 - 9 5
K COLOR PUSH :
TEXT/PRINTED PHOTO
Text print
(color PUSH)
1 - 9 3
L COLOR PUSH : TEXT Text (color PUSH) 1 - 9 3
M COLOR PUSH :
PRINTED PHOTO
Printed photo
(color PUSH)
1 - 9 5
N COLOR PUSH :
PHOTOGRAPH
Photograph
(color PUSH)
1 - 9 5
O COLOR PUSH :
TEXT/PHOTO
Text/Photograph
(color PUSH)
1 - 9 3
P COLOR PUSH : MAP Map (color PUSH) 1 - 9 5
Item/Display Content
Setting
range
Default
value
A CCD (MAIN) SCAN main scanning
magnification ratio adjustment
(CCD)
1 - 99 50
B CCD (SUB) SCAN sub scanning
magnification ratio adjustment
(CCD)
1 - 99 50
C SPF (MAIN) RSPF document front surface
magnification ratio adjustment
(Main scan)
1 - 99 50
D SPF (SUB) RSPF document front surface
magnification ratio adjustment
(Sub scan)
1 - 99 50
E SPFB (MAIN) RSPF document back surface
magnification ratio adjustment
(Main scan)
1 - 99 50
F SPFB (SUB) RSPF document back surface
magnification ratio adjustment
(Sub scan)
1 - 99 50
Item/Display Content
Setting
range
Default
value
To Next Page
Loading...
