Network Settings
*1 Depending on your machine specifications, only the items under "General Setting" will be displayed.
*2 This cannot be set on the machine. Set this in the system settings in the Web pages.
X Disabling of Auto Paper Selection Disabled 7-72
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-72
X Color 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-72
X Color Quick Scan from Document Glass Disabled 7-72
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-73
X B/W Quick Scan from Document Glass Enabled 7-73
● Color Adjustments 7-73
X Initial Color Balance Setting Factory default state 7-73
X Auto Color Calibration – 7-73
Item Factory default setting Page
■ Network Settings
7-74
● General Setting*
1
7-74
X IPv4 Settings DHCP 7-74
X IPv6 Settings Disabled 7-74
X Enable TCP/IP Enabled 7-74
X Enable NetWare Disabled 7-74
X Enable NetBIOS Disabled 7-74
X Enable EtherTalk Disabled 7-74
X Reset the NIC – 7-74
X Ping Command – 7-74
● Connection Type Switching*
1
7-75
● Wireless Settings*
1
7-75
X Configure (Access Point Mode) – 7-75
X Configure (Infrastructure Mode) – 7-76
● NAS Setting*
2
7-76
Item Factory default setting Page
To Next Page
Loading...
