Sharp XV-Z17000

XV-Z17000
XV-Z17000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
Printed in China
Imprimé en Chine
Impreso en China
Impresso na China
TINS-E929WJZZ
11P01-CH-NM
ENGLISH
FRANÇAIS ESPAÑOL PORTUGUÊS
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
SHARP CORPORATION
XVZ17000EUSHyo1-4.indd1XVZ17000EUSHyo1-4.indd1 2010/12/1711:49:482010/12/1711:49:48

Sharp XV-Z17000 Specifications

General

Matrix size	0.65 \
Projection distance	1.3 - 15.7 m
Vertical scan range	43 - 85 Hz
Horizontal scan range	15 - 110 kHz
Projection technology	DLP
Contrast ratio (dynamic)	40000:1
Contrast ratio (typical)	-
Screen size compatibility	40 - 500 \
Projector native resolution	1080p (1920x1080)
Aspect ratio	16:9
RS-232 ports	1
Maximum analog resolution	1600 x 1200 pixels
Maximum digital resolution	1920 x 1080 pixels
Focus	Manual
Zoom capability	Yes
Focal length range	21 - 24.2 mm
Aperture range (F-F)	2.5 - 2.7
Lamp power	250 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Supported video modes	1080i, 1080p, 480i, 480p, 540p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Built-in speaker(s)	No
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	- dB
Noise level (economic mode)	23 dB
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8.3 W
Power consumption (typical)	353 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	335 mm
Width	400 mm
Height	100 mm
Weight	5800 g

Summary

Introduction

Important Information and Cautions

Information and FCC Compliance

FCC compliance and measures for radio interference.

Declaration of Conformity

Compliance statement for SHARP PROJECTOR, MODEL XV-Z17000.

Lamp Replacement Cautions

Precautions and risks associated with mercury lamp replacement.

How to Read this Operation Manual

Using the Menu Screen

Explanation of how to navigate and use the projector's menu screen.

Preparing the Projector

Safeguards, Accessories, and Part Names

Essential safety, list of accessories, and projector parts identification.

Remote Control and Quick Start Guide

Instructions for remote control use and initial setup guide.

Setup

Setting Up the Projector

Guidance on optimal projector placement and setup.

Connections

Cable Samples and Video Connections

Visual guide to cables and instructions for connecting video equipment.

Computer and RS-232 C Connections

Guidance for connecting computers and controlling via RS-232C.

Reference and Appendix

Appendix Contents

Supplementary info including maintenance, troubleshooting, and specifications.

Maintenance and Lamp Information

Procedures for maintenance, lamp, and solutions for common problems.

Assistance, Specifications, Dimensions, and Index

Support contacts, technical specs, physical measurements, and topic index.

Important Safeguards

Setup and Usage Cautions

Lamp Unit and Setup Cautions

Warnings regarding lamp unit hazards and projector installation environment.

Placement and Usage Precautions

Advice on projector placement, usage, and handling precautions.

3 D Glasses: Usage and Precautions

3 D Glasses Handling, Care, and Battery

Safety instructions for handling, cleaning, and battery replacement of 3D Glasses.

3 D Viewing Precautions and Mode Switching

Guidelines for viewing 3D images and switching between 2D/3D modes.

Accessories

Supplied and Optional Accessories

List of items included with the projector and accessories available for purchase.

Part Names and Functions

Projector Exterior Parts Identification

Identification of the projector's external parts and controls.

Projector Features and Terminals

Carrying Handle, Kensington Lock, and Terminals

Instructions for carrying, security, and description of projector terminals.

Remote Control Functions

Remote Control Buttons Identification

Identification of buttons and functions on the remote control.

Using the Remote Control

Battery Installation and Usable Range

Guide for installing batteries and information on the remote control's operating range.

Quick Start Guide

Setting Up the Projector

Standard Front Projection Setup

Instructions for standard front projection setup.

Projection Modes and Ceiling Mount

Projector Mounting Modes and Ceiling Mount Setup

Explanation of projection modes and ceiling mount recommendations.

Image Size and Distance Chart

Chart showing image sizes and corresponding projection distances.

Screen Size and Projection Distance Details

Cable Connection Samples

Video, CameraGame, and Computer Cable Types

Cable connection types for video, cameras, games, and computers.

Connecting Video Equipment

HDMI and S-Video Connection Guides

Instructions for connecting HDMI and S-Video sources to the projector.

Connecting to a Computer

RGB Cable Connection Guide

Step-by-step guide for connecting a computer via RGB cable.

Controlling the Projector via Computer

RS-232 C Serial Control Connection

Instructions for connecting the projector for control via RS-232C.

Projector Power Operations

Power Cord Connection, Turning On, and Turning Off

How to connect power, turn on the projector, and switch to standby mode.

Image Projection Adjustments

Adjusting Focus, Size, and Height

Instructions for adjusting focus, picture size, and projector height.

Keystone Correction

Keystone Correction Explanation and Methods

Explanation of distortion and correction methods for keystone, sphere, and rotation.

Image Projection Adjustments (Continued)

Sphere and Rotation Correction Details

Detailed explanation on correcting spherical/cylindrical distortion and rotating images.

Input Mode and Image Position

Switching Input Mode and Adjusting Image Position

How to select input source and shift projected image position.

Image Projection Features

Temporary Black Screen, Freeze Image, Auto Sync, and Picture Mode

Features for black screen, freeze, auto sync, and picture mode selection.

Image Display and Settings

Enlarging Image, Iris Settings, Menu Hide, and Eco+Quiet

Features for image enlargement, iris, menu hide, and eco+quiet mode.

Resize Mode Options

Menu Bar Overview

Picture Menu Settings

Details of the adjustable settings within the "Picture" menu.

Using the Menu Screen

Menu Selections and Adjustments

How to navigate and select menu items for adjustment.

Picture Adjustment (Picture Menu)

Selecting Picture Modes and Adjusting Image Parameters

Guide to picture modes and detailed image parameter adjustments.

Picture Adjustment (Continued)

Iris Setting, Eco+Quiet Mode, and Advanced Settings

Controls for iris, eco+quiet mode, and advanced image adjustments.

Picture Adjustment (Continued)

Gamma Correction and Color Adjustment

How to adjust gamma for image gradation and color parameters.

Picture Adjustment (Continued)

Bright Boost, Film Mode, Detail Enhancement, and DNR

Features for bright boost, film mode, detail enhancement, and noise reduction.

Picture Adjustment (Continued)

Mosquito Noise Reduction (MNR) and Resetting Adjustments

How to reduce noise and reset all picture adjustments to defaults.

Computer Image Adjustment (SIG-ADJ Menu)

Adjusting Computer Image, Resolution, and Auto Sync

How to correct computer image issues, set resolution, and auto-sync signals.

Computer Image Adjustment (Continued)

Signal Type and Video System Settings

How to set signal type (RGB/YPbPr) and video system mode.

Computer Image Adjustment (Continued)

Video Setup, Dynamic Range, and Signal Info

Settings for video black level, dynamic range, and viewing signal information.

Adjusting the Projected Image (SCR-ADJ Menu)

Resize Mode and Image Position Adjustment

How to select resize mode and move the projected image position.

Adjusting Overscan Area

How to adjust the overscan area (display area) of the image.

Adjusting Projected Image (Continued)

Auto V-Keystone Correction

How to automatically correct vertical keystone distortion.

Keystone Mode Correction (SphereRotation)

How to correct distortion for screens and rotate images.

Image Rotation and Display Settings

Image Rotation, ReversingInverting, and Display Settings

How to rotate, invert images, and configure display and menu settings.

Projector Function Adjustments (PRJ-ADJ Menu)

Power Saving Modes and HDMI CEC Functions

Settings for auto power off, economy mode, and HDMI CEC features.

Input and System Settings

Input Names, Demo Mode, RS-232 C, Fan Mode, Defaults, and Lamp Timer

Settings for input names, demo mode, RS-232C, fan, defaults, and lamp timer check.

Enjoying 3 D Image Viewing

3 D Glasses Handling and Viewing Precautions

Safety instructions for handling, care, and viewing 3D images.

3 D Glasses Accessories and Parts

Supplied Accessories and Part Names

List of supplied accessories and identification of 3D glasses parts.

Before Using 3 D Glasses

Replacing the Button Cell Battery

Instructions for replacing the battery in the 3D Glasses.

3 D Glasses Usage and Mode Switching

Attaching Parts, Using Glasses, and Mode Switching

How to attach parts, use glasses, switch 2D/3D modes, and usage range.

Viewing 3 D Images

Receiving Auto-Detected 3 D Signals

How the projector automatically detects and displays 3D signals.

Viewing 3 D Images (Continued)

Receiving Non-Auto-Detected 3 D Signals and Ending Viewing

Manual 3D format selection and how to end 3D viewing.

3 D Settings (3 D MENU)

3 D Mode, Format, Auto Change, Time, Invert, Depth, and IR Settings

Configuration options for 3D mode, format, auto change, time, invert, depth, and IR emitter level.

3 D Format Menu Details

Maintenance Procedures

Cleaning the Projector, Lens, and Air Vents

Instructions for cleaning the projector's cabinet, lens, and air vents.

Maintenance Indicators

Temperature and Lamp Indicator Explanations

Explanation of the temperature and lamp indicators and their meanings.

Projector Indicator Status Details

Power, Lamp, and Temperature Indicator Status

Status indicators for projector power, lamp, and internal temperature.

Lamp Information and Replacement

Lamp Life, Replacement Recommendations, and Cautions

Information on lamp life, replacement, and associated hazards.

Removing and Installing the Lamp Unit

Resetting the Lamp Timer

Connection Pin Assignments

COMPUTERCOMPONENT, RS-232 C, and HDMI Pinouts

Pin assignment details for various projector terminals.

RS-232 C Specifications and Commands

Communication Conditions and Basic Command Format

Serial port settings and command/response format for RS-232C control.

RS-232 C Commands

Example Command: Turn On Projector

Example command sequence for turning the projector on.

RS-232 C Commands (Continued)

Computer, Component, and HDMI Input Commands

Detailed commands for controlling computer, component, and HDMI inputs.

RS-232 C Commands (Continued)

S-Video, Video, and 3 D Commands

Detailed commands for controlling S-Video, video inputs, and 3D settings.

Compatibility Chart

Computer Signal Compatibility

Compatibility information for various computer resolutions and signals.

Signal Compatibility

DTV and 3 D Signal Compatibility

Compatibility information for Digital TV and 3D signals.

Troubleshooting: Basic Issues

No Picture Projector Not Starting

Solutions for issues where the projector doesn't start or display an image.

Poor Color Blurred Picture Noise

Solutions for problems with color, blur, or noise in the image.

Troubleshooting: Advanced Issues

Unusual Sounds and Color Tints

Explanations for unusual sounds and solutions for green/pink image tints.

Black Levels, Brightness, and Image Quality

Solutions for banding, faded blacks, and overly bright or washed-out images.

Troubleshooting: Component Failures

Fan, Lamp, and Image Stability Issues

Solutions for noisy fan, lamp failures, flickering, and dark pictures.

Feature Malfunctions and Control Issues

Troubleshooting for One Touch Play, System Standby, RS-232C, and remote control problems.

For SHARP Assistance

Projector Specifications

Projector Dimensions

Index