H792x 3G/4G Router User Manual
Step 4 Click “Save” to finish configuration. After saving, user needs to login again.
---END
5.7.6 Network Test
Network Test
This function includes Ping function and Trace router function.
Step 1 Log-on WEB GUI of H792x 3G/4G router.
Step 2 Click “System > Network Test” to open “Network Test” tab.
Figure 5-52 Network Test Tab
Step 3 Input IP address or domain to be tested in “Destination”, click “Ping, to check whether the
router can be linked with destination.
Table 5-35 Network Test Parameter instruction
To input IP address or domain to be
To Next Page
Loading...
Need help?
General