H792x 3G/4G Router User Manual
Next hop IP address which the router will reach
Interface from router to gateway
Route No which the router reaches destination IP
Priority the router select route
---END
5.9 RESET button function
“RESET” button is on the rear panel and next to power interface. This button can be used
when the router is in use or when the router is turned on. Three are 3 functions to press
“RESET” button when the router is in use:
Press “RESET” for about 2 seconds, router will reboot.
Press “RESET” 5-10 seconds, the router will reboot, meanwhile, the router will be resumed
to default factory setting configuration.
Press “RESET” over 20 seconds, the router will reboot, and get into CFE upgrading. The
router is resumed to default factory setting configuration.
Press button when the router is turned on:
Press “RESET” button and turn on the rou ter, and keep pressing “RESET” for 2 seconds. The
router will get into CFE upgrading mode.
---END
To Next Page
Loading...
Need help?
General