H792x 3G/4G Router User Manual
Sta tic routing will forward according to the des tinati on address of the packet, i f the router received the
packet (e.g. source address is 1.1.1.1 destination address is 2.2.2.2), i t will forwa rd the packet to next hop
according to the route which meets with the destination address (2.2.2.2).
It will forward the packet to next hop according to the route which meets with the destination address
(2.2.2.2).
Poli cy routing will forwa rd a ccording to the source address of the packet, if the router received the
packet (e.g. source address is 1.1.1.1 destination address is 2.2.2.2), it will forwa rd the packet to next hop
according to the route which meet with the source address (1.1.1.1).
Poli cy routing has higher priority than sta tic routing, policy-based routing priority rega rdless of how
much.
---END
5.5.4 QoS (Optional)
QoS (Quality of Service) quality of service, is a security mechanism for the network, is a
technique to solve the network bandwidth allocation and network priority and other
issues. When the network is overloaded or congested, QoS to ensure that critical traffic is
not delayed or dropped, while ensuring the efficient operation of the network, our H792x
3G/4G Router supports custom QoS services.
Step 1 Log-on WEB GUI of H792x 3G/4G router.
Step 2 Click “Forward > QoS” to open “QoS” tab, as Figure 5-52.
Figure 5-33 QoS interface
To Next Page
Loading...
Need help?
General