Shenzhen Hongdian Technologies H7920 User Manual

Hongdian Corporation
68
H792x 3G/4G Router User Manual
Table 5-22 RIP Parameter Instruction
Parameter
Details
Operation
RIP Service
Enable or disable RIP
Service
Click the button to select.

Enable

Disable
Redistribute
Connected
Enable or disable
Redistribute Connected
Click the button to select.

Enable

Disable
Redistribute
Static
Enable or disable
Redistribute Static
Click the button to select.

Enable

Disable
Redistribute
Kernel
Enable or disable
Redistribute Kernel
Click the button to select.

Enable

Disable
Step 3 Click “Add” to add a new RIP route, configuration interface as Figure 5-54.
Figure 5-35 RIP route configuration interface
Step 4 Configure RIP route parameter instruction, as Table 5-27.
Table 5-23 RIP parameter instruction
Parameter
Details
Operation
Basic Setting
Add Type
Add the type of RIP
route
Click the button to select Add Type

When it is “Network”, need to
configure destination network
address.

When it is “Neighbor”, need to
configure neighbor’s IP address

Shenzhen Hongdian Technologies H7920 Specifications

General

Brand	Shenzhen Hongdian Technologies
Model	H7920
Category	Network Router
Language	English