H792x 3G/4G Router User Manual
3 Router Installation
About this chapter
Unpack H792x 3G/4G Router box and the packing list.
How to install H792x 3G/4G Router with SIM/UIM card and
Ethernet cable .etc.
Power supply needs of H792x 3G/4G Router.
3.1 Unpacking
After received the box of H792x, please unpack it and check if all accessories complete.
Please check Table 2-2 as reference.
3.2 How to install
3.2.1 SIM/UIM card install
H792x 3G/4G Router support single SIM/UIM carad, so you may need insert single SIM
before config it.
Before install SIM/UIM card, disconnect any power resource of the router.
Step 1 Use a small stick push the yellow button on router, the SIM slot will pop out as Figure 3-1
shows.
To Next Page
Loading...
Need help?
General