H792x 3G/4G Router User Manual
5.2.3 Parameter select
Router parameter select function is used for multi-function switch, like VPN parameter
switch, SIM parameter switch, multi-sever switch .etc. You could pre-config several
network parameter and switch between them, to achieve multiple Telecom operator
backup. This function also could switch VPN setting, for example, when modem online it
connect VPN 1, wan online it connect VPN2, they cannot connect at same time because
conflict, by this function you could easily switch when network failure.
Step 1 Login H792x WEB GUI.
Step 2 Single click “Network > parameter select”.
Figure 5-6 parameter select
Step 3 Add, modify, delete, enable and disable the parameter select rule.
add
To Next Page
Loading...
Need help?
General