H792x 3G/4G Router User Manual
Specify gateway type of static
routing, includes:
interface
static ip
Set a next hop IP address of
static route, IP address of the
adjacent router interface
Dropdown List
If the gateway type selects
static IP, gateway need to
manually input, format:
A.B.C.D
If the gateway type select
interface, the gateway needs
to select from dropdown list
When Routing Type is “Policy Route”
Set source type of policy route
Static IP
Interface
It can be configured when
“static IP” is selected in source
type, by adding IP address or
subnet manually.
Manual input
Format1: A.B.C.D/Mask
When source type is policy
route, need to manually set
source network address of
policy router
modem
Set the next hop IP of policy
route
static ip
interface
When the gateway type select
"Static IP" to fill in the IP
address, when gateway type is
"interface", it will use the
selected interfaces as gateway
Manual input
Format1: A.B.C.D/Mask
Set policy routing priority, the
priority lower the number, the
higher the priority
Step 4 Single click “save” icon to finish the static routing setting.