H792x 3G/4G Router User Manual
connectionless unreliable
transport protocol, suitable
for relatively high efficiency
requirements, and the
occasion of relatively low
reliability
DTU port timeout which
receive from the data center,
within the received packet
does not exceed the
maximum packet length
range, the data is reading at
this time, if the data is been
reading, and will display all
data during this time; If no
data,when it is greater than
the timeout, it will consider
reading data completely,
displays DTU serial terminal
Specify time according to your
need
data:1-65535ms
Default value:500
Units:ms
DTU waiting time to send the
serial data to the data center
side. Within waiting time,
the data sent over UDP / TCP
packets received maximum
packet length, then sent
immediately; if not more
than UDP / TCP packets
received maximum packet
length, then wait for data
until it reaches the last
packet idle time , and then to
send
Specify time according to your
need
data:1-65535ms
Default value:500
Units:ms
DataServerCenter(DSC) ip or
domain
Format:A.B.C.D/Mask or Word
Type
DataServerCenter(DSC) port
number
The reconnect interval is DTU
client fail to connect to DSC
server
Manually input:1-65535
Units:second
The retry times is DTU client
fail to connect to DSC server
Manually input,Max length is 64