Shenzhen Hongdian Technologies H7920 User Manual

Hongdian Corporation
59
H792x 3G/4G Router User Manual
Parameter
Details
Operation
Original
Address Type
The external address,
the address needs to
be converted
Dropdown List

interface

static
Interface
(when the
initial address
type select
“interface” ,
needs to be
configured)
Indicates the external
address of IP packets to
an interface of the
router
Dropdown List

br0

modem
Original
Address
(when the
initial address
type select
“static”,
needs to be
configured)
The external address,
the address needs to
be converted
Manual input
Format1：A.B.C.D
Format2: A.B.C.D/Mask
Original port
The port of external IP,
the port need to be
replaced
Value area: 1～65535
Mapping
address
Internal IP address
e.g. 192.168.8.1
Mapping port
The port of Internal IP
address
Value area :1～65535
Step 5 Single click “save” icon to finish.
---END
SNAT configuration rule
SNAT is the source address translation, and its role is to translate source address of IP
packets into another address.
Step 6 Log-on WEB GUI of H792x 3G/4G router.
Step 7 Click “Forward > NAT” to open “NAT” tab.
Step 8 NAT Type select “SNAT”, Configuration interface as shown in Figure 5-47.

Shenzhen Hongdian Technologies H7920 Specifications

General

Brand	Shenzhen Hongdian Technologies
Model	H7920
Category	Network Router
Language	English