SICK DUSTHUNTER T User Manual

120 DUSTHUNTER T · Operating Instructions · 8012428 V 2.0 · © SICK MAIHAK GmbH Germany
Specifications
7.3 Accessories
7.3.1 Connection cable, sender/receiver unit - MCU
7.3.2 Connection cable, sender/receiver unit - reflector
Only for DUSTHUNTER T200
7.3.3 Purge air supply
7.3.4 Assembly parts
7.3.5 Device check accessories
7.3.6 Options for MCU control unit
7.3.7 Misc.
Name Part number
Connection cable, length 5 m 7042017
Connection cable, length 10 m 7042018
Name Part number
Connection cable, length 5 m 2045416
Connection cable, length 10 m 2045417
Connection cable, length 20 m 2048674
Connection cable, length 50 m 2048675
Name Part number
Purge air hose DN 40, sold by the meter 5304683
Purge air hose DN 25, length 5 m 2046091
Purge air hose DN 25, length 10 m 7047536
Adapter 40-25 7047814
Hose clamp D20-32 7045039
Hose clamp D32-52 5300809
Name Part number
Assembly kit, flange - analyzer 2018183
Assembly kit, flange - reflector 2018184
Name Part number
Check filter set 2048676
Name Part number
Analog input module, 2 channels, 100 Ω, 0/4...22 mA, electrically isolated 2034656
Analog output module, 2 channels, 500 Ω 0/4 ... 22 mA,
electrically isolated per module
2034657
Module carrier (for one each AI or AO module) 6028668
Connection cable for optional I/O modules 2040977
Interface module Profibus DP V0 2040961
Interface module Ethernet 2040965
Name Part number
Adjusting holder 2042907
Optical adjusting device for flange assembly 1700462

SICK DUSTHUNTER T Specifications

General

Brand	SICK
Model	DUSTHUNTER T
Category	Measuring Instruments
Language	English