Important Information
DUSTHUNTER T · Operating Instructions · 8012428 V 2.0 · © SICK MAIHAK GmbH Germany 11
Preventive measures for operating safety
Recognizing malfunctions
Every deviation from normal operation is to be regarded as a serious indication of a
functional impairment. These are, amongst others:
● Warning displays (e.g. heavy contamination)
● Significant drifts in measured results
● Increased power consumption
● Higher temperatures of system components
● Monitoring devices triggering
● Smells or smoke emission
Avoiding damage
NOTICE:
The user must ensure that:
b
Neither failures nor erroneous measurements can lead to operational
states that can cause damage or become dangerous
b
The specified maintenance and inspection tasks are carried out regularly
by qualified, experienced personnel.
NOTICE:
The operator must ensure the following to avoid malfunctions that can
indirectly or directly lead to injuries to persons or material damage:
b
The responsible maintenance personnel are present at any time and as
fast as possible
b
The maintenance personnel are adequately qualified to react correctly to
malfunctions of the measuring system and any resulting operational
interruptions (e.g. when used for measurement and control purposes)
b
The malfunctioning equipment is switched off immediately in case of doubt
and that switching off does not cause collateral malfunctions.
To Next Page
Loading...
