28 GMS800 · Operating Instructions · 8013025 V1.2 · © SICK MAIHAK GmbH
Installation
Subject to change without notice
3.6 Interfaces
Ethernet
A PC can be connected to the Ethernet interface (network connection). The “SOPAS ET”
application program supports digital communication with the GMS800.
Application options with “SOPAS ET”:
● Measured value and status inquiries
● Remote control
● Parameter setting
● Diagnosis
● Setting the internal configuration
CAN bus
External System modules can be connected to the CANopen interfaces. One of the
CANopen connections is reserved for the CAN bus terminator (terminating resistor).
Position of interface connections
→
Supplementary Operating Instructions for
Enclosure