FLOWSIC100 Operating Instructions
Gas Velocity Monitor
Commissioning and Configuration
92 © SICK MAIHAK GmbH · Germany · All rights reserved 8012513/03-2008
4.1.4 Using the SOPAS ET Configuration Software
Device Selection
Select the rquired devices on the ‘‘Network Scan Assistant” page and move them into the
‘‘Projekt Tree” (using the mouse with drag-and-drop or double-click, or using the ‘‘Add”
button).
Fig. 4.6: Selection of required devices
Password
Certain device functions are only accessible after a password has been entered. Access
rights are assigned in 3 user levels:
The password for user level 1 is contained in the Appendix.
Language Selection
If necessary, set the required language in the "Tools / Options / Localization" menu (see
Fig. 4.7. The settings take effect after the software has been restarted.
User level Access to
0 none Display of measured values and system status
1 "Authorized Operator" Displays inquiries as well as commissioning resp. adjustment to
customer-specific demands and diagnosis of necessary parameters
2 "Service" Displays inquiries as well as all parameters required for service tasks
(e.g. diagnosis and clearance of possible malfunctions)
To Next Page
Loading...
