3) Description
① KEY operation (selecting menu)
A. Esc: Overview
-. Return to OVERVEW screen
B. F1: History Dump
-. Go to screen that displays stored data on STRING GRID.
C. F2: PURGE
-. Send PURGE signal to measuring instrument. To get the signal, setup data
must be made in advance
D. F3: ZERO
-. Send ZERO CALIBRATION signal to measuring instrument of relevant item.
To get the signal, setup data must be made in advance
E. F4: SPAN
-. Send SPAN CALIBRATION signal to measuring instrument of relevant item.
To get the signal, setup data must be made in advance.
F. F5: RESET
- Complete the execution of F2, F3
G. F6: AUTO-CAL
- Execute Zero, Span, and Purge all over.
CAL data are not transmitted to Environment Management Corporation.
(¿ Use it for confirmation of D/L and measuring instrument configuration)
H. PgUp/PgDn: CH change
-. Use when change items to monitor
To Next Page
Loading...
