(5) Communication Monitoring (F1 à F2 screen)
1) Outline
-. Bi-directional monitor of standard transmission port and extended multi port
-. Display protocol setups and transmission rates of each port
2) Screen Features
① Communication port tap: classified ports, “ COM01” means standard
communication port-1. Multi port begins with COM3 (when it is added).
② Communication port setup particulars: the particulars are setup protocol at
communication port.
③ Transmission rate [COM Hit-Rate"]: Display daily transmission rate.
④ Port monitoring [Port DATA # 0: Tx]: Display communication frame when
communication is occurred at relevant port.
EX) Data Logger _ FEP
[Picture 7]
EX) FEP _ Data Logger
To Next Page
Loading...
