User manual
21
limit.
Over
Legal Limit Over Data Legal Limit Over Data
Calibration
Calibration Data collected while the
analyzer is in calibration
mode.
Malfunction
Malfunction Performance of analyzer
is poor.
Power fail
Power Failure of Analyzer Power Failure of Analyzer
Maintenance
Maintenance Analyzer is in
maintenance mode.
DL_Err
Datalogger Error Level of analog input
signal is out of range
DL_Power fail
Datalogger Power Failure The data with DL.POWER
means D/L was out of
power at the time.
To Previous Page
Loading...
