SICK DUSTHUNTER T50

10 Optional Functions
114
Q Alarm value
Pressing the [VALUE] button in the MEASURE VALUE ALARM screen displays the
ALARM VALUE screen.
Fig. 92 ALARM VALUE screen
Pressing the numerical keypad to input the value.
Pressing each key allows the corresponding operation as follows:
Note
z In the state without selecting COMPONENT cannot set TYPE or ALARM VALUE.
z Even without setting the H.HIGH alarm, the H.HIGH alarm can be used.
The H.HIGH alarm and HIGH alarm are independent each other.
At input these alarm values, set so that H.HIGH value is more than HIGH value.
CANCEL Returns to the MEASURE VALUE ALARM screen without changing the setting.
CLEAR The value input to the editing area is cleared.
BACK The last digit input is cleared.
SET Returns to the
MEASURE VALUE ALARM screen with the setting changed.