SICK DUSTHUNTER T50

76
8012428/YWL2/3-0/2016-08| SICKO P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER T
Subject to change without notice
4 START-UP AND PARAMETER SETTINGS
4.4.4 Setting the analog outputs parameters
Select the “Configuration / IO Configuration / Output Parameters” directory to set the
analog outputs.
Fig. 51: SOPAS ET menu: MCU/Configuration/IO configuration/Output Parameters
● Default values see “Factory settings”, page 74
● In order to output the dust concentration under standard conditions (“Conc. s.c.”
(Ext)), set the parameters for the analog outputs according to see “Setting the analog
inputs parameters”, page 78.