82
8012428/YWL2/3-0/2016-08| SICKO P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER T
Subject to change without notice
4 START-UP AND PARAMETER SETTINGS
4.4.8 Data backup in SOPAS ET
All parameters relevant for recording, processing and input/output of measured values as
well as current measured values can be saved in SOPAS ET and printed. This allows easy
reentering of set device parameters as needed or registering device data and states for
diagnostic purposes.
The following options are available:
● Saving as a project
Not only device parameters but also data logs can be saved.
● Saving as a device file
Saved parameters can be processed without a device connected and transferred to the
device again later.
● Saving as a protocol
Device data and parameters are registered in the Parameter protocol.
A Diagnosis protocol can be created for analysis of the device function and recognition
of possible malfunctions.
Parameter protocol example
Fig. 54: DUSTHUNTER T Parameter protocol (example)
Description, see SOPAS ET Help menu and DUSTHUNTER Service Manual.
To Next Page
Loading...
