SICK DUSTHUNTER T50

10 Optional Functions
115
10.5 Peak Count (with CO Analyzer)
The peak count is the function to count the time exceeding the set concentration value.
When the peak count per hour exceeds the set times, the alarm is triggered.
10.5.1 Peak count set
This section describes the setting operation of peak count set.
1. Press the [MENU] key in the MEAS. screen.
Press the [X] key three times to display the MENU 4/5 (OPTION menu) screen.
Fig. 93 MENU 4/5 (OPTION menu) screen
2. Press the [CO PEAK COUNT ALARM] button.
The CO PEAK COUNT ALARM screen appears.
Fig. 94 CO PEAK COUNT ALARM screen