CONTENTS
4
8012428/YWL2/3-0/2016-08 | SICKO P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER T
Subject to change without notice
3 Assembly and Installation...................................................................... 35
3.1 Project planning............................................................................................ 35
3.2 Assembly ....................................................................................................... 36
3.2.1 Fitting the flange with tube.......................................................... 36
3.2.2 Fitting the MCU control unit......................................................... 39
3.2.3 Fitting the optional external purge air unit.................................. 41
3.2.4 Assembly work.............................................................................. 42
3.2.5 Fitting the weatherproof cover..................................................... 43
3.2.6 Installing fail-safe shutters .......................................................... 44
3.2.7 Components for hall air monitoring (option) ............................... 45
3.3 Electrical installation .................................................................................... 46
3.3.1 Electrical safety ............................................................................ 46
3.3.1.1 Properly installed power isolating switches............. 46
3.3.1.2 Lines with correct rating........................................... 46
3.3.1.3 Grounding the devices.............................................. 46
3.3.1.4 Responsibility for system safety .............................. 46
3.3.2 General information, prerequisites ............................................. 47
3.3.3 Installing the purge air supply ..................................................... 47
3.3.3.1 Control unit with integrated purge air supply
(MCU-P) ..................................................................... 47
3.3.3.2 Optional external purge air unit ............................... 48
3.3.4 Connecting the MCU control unit................................................. 50
3.3.4.1 Work to be done ....................................................... 50
3.3.4.2 MCU processor board connections.......................... 51
3.3.4.3 Connection of connection line to MCU .................... 52
3.3.4.4 Standard connection ................................................ 53
3.3.5 Connecting the MCU remote control unit.................................... 54
3.3.5.1 Connection to the MCU control unit......................... 54
3.3.5.2 Connection to the MCU remote control unit............ 54
3.3.6 Connecting the reflector on DUSTHUNTER T200........................ 55
3.3.7 Fitting the interface and I/O module (option) ............................. 56
4 Start-up and Parameter Settings ..........................................................57
4.1 Basics............................................................................................................ 57
4.1.1 General information ..................................................................... 57
4.1.2 Installing SOPAS ET ...................................................................... 58
4.1.2.1 Password for SOPAS ET menus................................ 58
4.1.3 Connection to the device via USB line ........................................ 58
4.1.3.1 Finding the DUSTHUNTER COM port........................ 58
4.1.4 Connection to the device via Ethernet (option) .......................... 60
4.2 Application-specific settings......................................................................... 61
4.2.1 Preparatory work .......................................................................... 61
4.2.2 Focussing the sender light beam for transmission
measurement ............................................................................... 64
4.2.3 Scaling the measuring system for transmission measurement. 67
4.2.4 Entering application-specific parameters ................................... 69
To Next Page
Loading...
Need help?
General
