SICK ICR880 Generation 3 User Manual

SAFETY 2
11
8011325/18IM/2020-07-02|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | ICR880/890
2 Safety
This chapter concerns your own safety and the safety of persons who use the camera
systems.
▸
Please read this chapter carefully before you begin working with the camera system.
2.1 Qualified safety personnel
The camera system must only be mounted, operated, and maintained by properly
qualified personnel.
The following qualifications are necessary for the various tasks:
Tasks
Qualification
Mounting and maintenance
 Practical technical training
 Knowledge of the current safety regulations in the
workplace
Electrical installation and
device replacement

Practical electrical training
 Knowledge of current electrical safety regulations
 Knowledge of device control and operation in the particular
application concerned (e.g., conveying system, mounting
system)
Commissioning, configuration

Basic knowledge of the Windows operating system used
 Basic knowledge of the design and setup (addressing) of
Ethernet connections when connecting the camera system
to Ethernet
 Basic knowledge of data transmission

Basic knowledge of 1D/2D-code technology
Operation of the device for the
specific application
 Knowledge concerning device control and operation in the
particular application concerned (e.g., conveying system,
mounting system, crane, etc.)
 Knowledge concerning the software and hardware
environment of the particular application concerned (e.g.,
conveying system, mounting system, crane etc.)
 Knowledge of the mechanical and electrical parameters of
the conveying line and properties of the conveying system
that relate to control and operation
 Knowledge of the software and hardware environment for
the particular application concerned (e.g., conveying line)
Tab. 3: Qualified safety personnel

SICK ICR880 Generation 3 Specifications

General

Brand	SICK
Model	ICR880 Generation 3
Category	Digital Camera
Language	English