6 COMMISSIONING AND CONFIGURATION
8011325/18IM/2020-07-02|SICK
OPERATING INSTRUCTIONS | ICR880/890
Subject to change without notice
6.3.2 Configuring the parameters
You can open the individual functional areas of the configuration via the project tree
structure.
1. Click the plus symbol to expand the tree.
2. Select a functional area in the project tree.
The right-hand side shows the input fields with the loaded standard parameters.
Using diagnostic tools
If necessary, use the diagnostic tools “read diagnosis” and “event monitor” for online
presentation and recording of the output states of switching inputs and outputs as well as
data transmissions to the host.
To Next Page
Loading...
