SICK ICR880 Generation 3 User Manual

1 ABOUT THESE OPERATING INSTRUCTIONS
6
8011325/18IM/2020-07-02|SICK
OPERATING INSTRUCTIONS | ICR880/890
Subject to change without notice
1 About these operating instructions
1.1 Purpose of this document
This document guides technical personnel through the mounting and operation of the
ICR880/890 series camera systems with dynamic focus adjustment and the following
variants of the system components:
• System 1
ICD880 camera with standard lens (focal length 80 mm) and illumination unit
ICI890-x2xxx or ICI890-x5xxx (length 750 mm)
• System 2
ICD890 camera with standard lens (focal length 135 mm) and illumination unit
ICI890-x1xxx or ICI890-x4xxx (length 900 mm)
• System 3
ICD890 camera with standard lens (focal length 135 mm) and illumination unit
ICI890-x0xxx or ICI890-x3xxx (length 1,100 mm)
All systems include a coordinating controller. Either an MSC800 or an SIC2000 can be
used.
The camera systems available are outlined in chapter 3.1.3 Device types.
These operating instructions contain information about the following topics related to the
camera systems:
• Safety
• Product description
• Mounting
• Electrical installation
• Commissioning and configuration
• Maintenance and repairs
• Fault diagnosis and troubleshooting
• Technical data and dimensional drawings
1.2 Description of software status
Software/Tool
Function
Status
ICR880/890 system
SICK firmware
From V. 3.x
SOPAS-ET*)
Configuration software (Windows-based)
From V. 2.38
*) Can run on a PC with a WindowsTM operating system
Tab. 1: Description of software status

SICK ICR880 Generation 3 Specifications

General

Brand	SICK
Model	ICR880 Generation 3
Category	Digital Camera
Language	English