CONTENTS
8011325/18IM/2020-07-02|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | ICR880/890
Contents
1 About these operating instructions .................................................................... 6
1.1 Purpose of this document ........................................................................ 6
1.2 Description of software status ................................................................ 6
1.3 Target group ............................................................................................. 7
1.4 Information depth .................................................................................... 7
1.5 Abbreviations used................................................................................... 8
1.6 Symbols used ......................................................................................... 10
2 Safety ................................................................................................................... 11
2.1 Qualified safety personnel ..................................................................... 11
2.2 Intended use ........................................................................................... 12
2.3 General safety notes and protective measures ................................... 13
2.3.1 Safety notes and symbols ...................................................... 13
2.3.2 General safety notes ............................................................... 14
2.3.3 Potential sources of danger ................................................... 15
2.4 Protecting the environment ................................................................... 20
3 Product description ............................................................................................ 21
3.1 Camera system design........................................................................... 21
3.1.1 Device view .............................................................................. 22
3.1.2 Scope of delivery ..................................................................... 24
3.1.3 Device types ............................................................................ 25
3.2 System requirements ............................................................................. 26
3.2.1 Mounting requirements .......................................................... 26
3.2.2 Electrical installation requirements ....................................... 27
3.2.3 Commissioning and configuration requirements .................. 27
3.3 Product features and functions ............................................................. 27
3.4 Operating principle of the reading system ............................................ 29
3.4.1 Reading configuration ............................................................. 30
3.4.2 Object trigger control .............................................................. 30
3.4.3 Focus control ........................................................................... 30
3.4.4 Illumination control ................................................................. 30
3.4.5 Position and alignment ........................................................... 31
3.4.6 Increment configuration ......................................................... 31
3.4.7 Image request ......................................................................... 32
3.4.8 Code configuration .................................................................. 32
3.4.9 Network ................................................................................... 32
3.4.10 Data interfaces ........................................................................ 33
3.5 Configuration with SOPAS-ET ................................................................. 33
3.6 Operating elements and displays .......................................................... 34
3.6.1 Operator interface ................................................................... 34
3.6.2 Camera LEDs ........................................................................... 35
4 Mounting ............................................................................................................. 36
4.1 Overview of the mounting steps ............................................................ 36
4.2 Preparing for the mounting procedure.................................................. 36
4.2.1 Getting the components and accessories ready ................... 36
4.2.2 Tools and auxiliary equipment ............................................... 37
4.2.3 Selecting the mounting location ............................................ 37
4.2.4 Placement on the conveyor system ....................................... 38
4.3 Mounting and adjustment ..................................................................... 40
To Next Page
Loading...
