SICK ICR880 Generation 3

10 FIGURES AND TABLES
112
8011325/18IM/2020-07-02|SICK
OPERATING INSTRUCTIONS | ICR880/890
Subject to change without notice
10.2 List of figures
Fig. 1: LED light beams from the illumination unit ............................................ 16
Fig. 2: Position of the optional USB connection on the side of the camera .... 19
Fig. 3: Camera system design ............................................................................ 21
Fig. 4: Integrating the camera system ............................................................... 21
Fig. 5: View of camera system (from above) ..................................................... 22
Fig. 6: View of complete camera (from below) .................................................. 22
Fig. 7: View of camera (from below) .................................................................. 23
Fig. 8: View of ICD890-xxxxxxxS03 camera (from below) ................................. 23
Fig. 9: Simple mounting of the camera system on the mounting frame
(example) ................................................................................................. 26
Fig. 10: ICR880/890 camera system on a conveyor system, single-side reading
from above ............................................................................................... 29
Fig. 11: Function of external sensors (read cycle, object distance, and conveyor
speed) ....................................................................................................... 29
Fig. 12: Diagram of illumination unit with illumination area .............................. 30
Fig. 13: Deflector mirror principle of operation ................................................... 31
Fig. 14: Inclination angle of the camera system ................................................. 31
Fig. 15: Captured image for analysis (example) .................................................. 32
Fig. 16: SD memory card for parameter set ........................................................ 34
Fig. 17: LEDs on the camera ................................................................................ 35
Fig. 18: Terminal compartment for camera and illumination unit ..................... 37
Fig. 19: Single-side reading from above: placement of the camera system above
the conveyor system ................................................................................ 38
Fig. 20: Multi-side reading: placement of several camera systems with
VMS4xx/5xx on conveyor system ........................................................... 38
Fig. 21: Underside reading: placement of the camera system underneath the
conveyor ................................................................................................... 39
Fig. 22: Cleaning unit for underside reading ....................................................... 39
Fig. 23: Alignment of the camera system and deflector mirror .......................... 40
Fig. 24: Position of the components of the camera system ............................... 40
Fig. 25: 180° mounting bracket for camera system and deflector mirror ........ 41
Fig. 26: Mounting the deflector mirror: attaching the 180° mounting bracket 42
Fig. 27: Mounting the deflector mirror: inserting the deflector mirror ............... 42
Fig. 28: Mounting the deflector mirror: using the hole pattern .......................... 43
Fig. 29: Mounting the camera system: securing the 180° mounting bracket .. 44
Fig. 30: Mounting the camera system: inserting the illumination unit without the
camera ..................................................................................................... 44
Fig. 31: Mounting the camera system: securing the illumination unit ............... 44
Fig. 32: Mounting the camera system: inserting the camera ............................. 45
Fig. 33: Mounting the camera system: inserting the screw into the fitting ....... 45
Fig. 34: Connection principle of a camera system and controller unit .............. 47
Fig. 35: Connection principle of several camera systems (multi-side reading) . 48