SICK ICR880 Generation 3

PRODUCT DESCRIPTION 3
29
8011325/18IM/2020-07-02|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | ICR880/890
3.4 Operating principle of the reading system
The camera system is an intelligent sensor system for the automatic and non-contact
identification and decoding of 1D/2D codes. In principle, the codes can be identified on
any side of moving objects in a conveyor system.
In the case of single-side reading, the codes are identified by a camera from above,
below, or from the side. To facilitate the mounting and alignment of the camera system,
the camera image is taken via a deflector mirror.
The camera system is operated in conjunction with a controller unit, by means of which
the read results are output to the data interfaces.
Fig. 10: ICR880/890 camera system on a conveyor system, single-side reading from above
No.
Meaning
1
Camera and illumination unit
2
Deflector mirror
3
Object
4
Direction of conveyor
5
Controller unit
External sensors provide information about the read cycle, the object distance, and the
position of the object on the conveyor.
Fig. 11: Function of external sensors (read cycle, object distance, and conveyor speed)
Single-side reading