6 COMMISSIONING AND CONFIGURATION
8011325/18IM/2020-07-02|SICK
OPERATING INSTRUCTIONS | ICR880/890
Subject to change without notice
6.2.6 Loading device drivers into the SOPAS project
Install the device driver for the controller. The device drivers can be transferred directly
from the device to SOPAS-ET.
Getting started
1. Press OK to confirm you have seen the notification.
2. Click Install device driver in the tile.
3. You will be asked where you want to get the device drivers from. Load the device
drivers from the device and select the Device upload option.
4. Click OK to confirm. The device drivers are downloaded and installed in the SOPAS
project.
It can be inferred from the tile of the controller that the camera system is now
recognized by the configuration PC but is not yet connected to the system, meaning
that it is still offline.
To Next Page
Loading...
