Clinitek Advantus Operator’s Guide 133
Symbols
Stop Run Select this key to cancel the run or the last strip.
If the run is cancelled, all strips on the platform are
immediately moved to the waste bin and no results
are reported for them.
This key displays on the Ready/Run screen and
becomes active as soon as the first strip in a run is
detected.
Help Select this key to display a Help screen with
information about the screen.
Select Previous Screen from the Help screen to
return to the previous screen.
Help is not available on all screens.
Next Screen Select this key to display the next screen in a series.
This key displays only if additional screens exist.
Previous
Screen
Select this key to change the display back to the
previous screen in a series.
This key displays only if previous screens exist.
Enter Select this key to accept data you enter, such as ID
and sequence numbers, date, and time.
If you exit the screen without selecting Enter, the
analyzer does not save the newly entered data and
retains any data in memory.
Move Right Select this key to move the cursor one space to the
right.
If the cursor is at its right-most position, selecting
this key has no effect. Moving the cursor does not
erase any characters and new characters can be
entered directly over the incorrect characters.
Move Left Select this key to move the cursor one space to the
left.
If the cursor is at its left-most position, the cursor
does not move. The character at the current position
is usually erased before the cursor is moved to the
left. If this key displays in conjunction with the
Move Right key, the existing characters are not
erased as the cursor is moved.
Key Name Description
To Next Page
Loading...
Need help?
General
