Siemens Simantic ET 200S - Page 238

Analog electronic modules
4.22 2AO I High Feature analog electronic module (6ES7135-4MB02-0AB0)
ET 200S
4-108 Manual, Edition 10/2005, A5E00514527-01
Block diagram




'$&
9
/
0
'$&
0
$1$
0
$1$
0
$1$
3
3
(76
EDFNSODQHEXV
LQWHUIDFH
FRQQHFWLRQ
%DFNSODQHEXV
Figure 4-22 Block diagram of the 2AO I High Feature
2AO I High Feature Technical Specifications (6ES7135-4MB02-0AB0)
Dimensions and Weight
Dimensions W × H × D (mm)
(the total dimensions depend on the selected
terminal module)
15 x 81 x 52
Weight Approx. 40 g
Data for specific modules
Supports isochronous operation Yes
Number of outputs 2
Cable length
• Shielded
max. 200 m
Parameter length 7 bytes
Voltages, currents, potentials
Rated supply voltage of the electronics L+ 24 VDC
• Reverse polarity protection
Yes
Galvanic isolation
• Between the channels and backplane bus
Yes
• Between channels and power supply of the
electronics
Yes
• Between the channels
no
Permissible potential difference
• Between MANA and M
internal
(U
ISO
)
75 VDC / 60 VAC
Insulation tested 500 VDC
Current consumption
• From the power supply L+
max. 150 mA
Power dissipation of the module max. 2 W