Siemens SIMATIC PCS 7 Programming Manual

Name Data type Description
DataTypeId Int ID of the data type
DataTypeName nvarchar(255) Name of the data type
UoMId Int ID of the technical unit of measure
UoMName nvarchar(255) Name of the technical unit of measure
HighValue Float High limit of the value
LowValue Float Low limit of the value
RecHighValue Float High recipe limit of the value
RecLowValue Float Low recipe limit of the value
CalcScript nvarchar(max) Formula for calculating the value
ValueSourceId Int ID of the source parameter, that is, the
corresponding parameter in the higher-
level object.
sp_float Float Float (setpoint)
asp_float Float Float (actual-setpoint)
av_float Float Float (process value)
sp_int Int Integer (setpoint)
asp_int Int Integer (actual-setpoint)
av_int Int Integer (process value)
sp_string nvarchar(255) String (setpoint)
asp_string nvarchar(255) String (actual-setpoint)
av_string nvarchar(255) String (process value)
loc_unitallocname nvarchar(255) Allocation name (UnitAlloc)
loc_unitname nvarchar(255) Unit name
sp_locname nvarchar(255) Location name (setpoint)
asp_locname nvarchar(255) Location name (actual-setpoint)
av_locname nvarchar(255) Location name (process value)
sp_matname nvarchar(255) Material name (setpoint)
sp_matcode nvarchar(255) Material code (setpoint)
asp_matname nvarchar(255) Material name (actual-setpoint)
asp_matcode nvarchar(255) Material code (actual-setpoint)
av_matname nvarchar(255) Material name (process value)
av_matcode nvarchar(255) Material code (process value)
sp_EnumValue nvarchar(255) Name of the enumeration value (set‐
point)
asp_EnumValue nvarchar(255) Name of the enumeration value (actual-
setpoint)
av_EnumValue nvarchar(255) Name of the enumeration value (proc‐
ess value)
sp_Unit nvarchar(255) Name of the unit (setpoint)
asp_unit nvarchar(255) Name of the unit (actual-setpoint)
av_Unit nvarchar(255) Name of the unit (process value)
sp_prot Int Reserved for user data (setpoint)
Description of the views
3.34 vParameterRTInfo
SIMATIC BATCH - Views of the report data V9.0
Programming Manual, 05/2017, A5E38208785-AA 37

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English