Siemens SIMATIC PCS 7 - 5 Description of the Enumerations; Actionstate; Allocstrategy; Actiontype

Description of the enumerations
5
5.1 ActionState
ID Description
0 Inactive
1 Not supported
2 Refused
3 In progress
4 Closed
5 Error
6 Aborted
7 Held
8 Waiting for signature
5.2 AllocStrategy
ID Description
0 Preferred unit
1 The longest out of use
2 Operator selection
3 Process parameters
5.3 ActionType
ID Description
3 Start step
4 Pause step (after step)
5 Hold step (immediately)
6 Abort step
7 Resume step
8 Complete step
9 Reset step
10 Remove breakpoint
19 Changing batch parameters
22 Parameter change
23 Parameter change
SIMATIC BATCH - Views of the report data V9.0
Programming Manual, 05/2017, A5E38208785-AA 53