Siemens SIMATIC PCS 7 Programming Manual

Name Data type Description
cmd_filter Int Status that the respective recipe phase must have in runtime
for a corresponding command to be passed
State Int Status of the object
ExState Int Expanded status of the object
Flags Int Internal
ContinousFlag Bit Continue option set
ExecuteInPLC Bit Executed in AS-based mode
START datetimeoffset(3) Status of the object
STOP datetimeoffset(3) End time of the object
DurationPlanned Nvarchar(255) Planned duration (format: DD HH:MM:SS)
DurationActual Nvarchar(255) Actual duration (format: DD:HH:MM:SS)
Deviation Nvarchar(255) Deviation between planned and measured duration (format:
DD:HH:MM:SS)
MonitoringTime Nvarchar(255) Monitoring time for the object (format: DD HH:MM:SS)
StartEventID Bigint ID of the start notification of the object
LastEventID Bigint ID of the last notification of the object
GateLogic Nvarchar(255) Linking logic of the transition conditions
Conditions Nvarchar(max) Conditions in XML format
StartEventId Bigint StartEventID of the object
TAGS Nvarchar(max) Configured process tags in XML format
ExStartTime datetimeoffset(3) Extended start time of the object*
ExEndTime datetimeoffset(3) Extended end time of the object*
SP_CS Nvarchar(255) Setpoint of the control strategy
AV_CS Nvarchar(255) Process value of the control strategy
AllocName4Rpe Nvarchar(255) Unit allocation of the element
UnitClassName4Rpe Nvarchar(255) Unit class
AllocStrategy4Rpe Nvarchar(255) Allocation strategy
AllocMode4Rpe Nvarchar(255) 1 ("Start Allocation"): Start batch processing only when the unit
is free
AllocRunTime4Rpe Nvarchar(255) Duration of allocation (format: DD:HH:MM:SS)
UnitName4Rpe Nvarchar(255) Unit name
hasTags Bit Process tags are configured for the element
hasComments Bit Comments are available for the element
hasActions Bit Actions are available for the element
hasErrors Bit Error are pending for the element
hasParameters Bit The element has parameters
hasRefreshParameters Bit Current parameters are available for the element
hasMsg Bit Messages might be available for the element
*: The extended times are there to ensure that no messages, actions etc. are lost. The reason
for this is that such messages are sent, for example, a few milliseconds before the start or after
the end of the object. If the object has only been run once, this time period is set so that all the
information fits within it.
Description of the table value functions
4.2 batch_GetStandardReport
SIMATIC BATCH - Views of the report data V9.0
Programming Manual, 05/2017, A5E38208785-AA 51

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English