Siemens Simatic S7-300

Digital modules
3.34 Digital IO module SM 327; DI 8/DO 8 x DC 24 V/0.5 A; programmable (6ES7327-1BH00-0AB0)
S7-300 Automation System Module data
3-124 Manual, 08/2006, A5E00105505-04
3.34.1 Parameters of SM 327; DI 8/DX 8 x DC 24 V/0.5 A
Programming
The general procedure of programming digital modules is described in the chapter
Programming digital modules.
Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A, programmable
The table below provides an overview of configurable and defaults for SM 327; DI 8/DO 8 x
VDC 24/0.5 A.
The defaults apply if you have not set any parameters in
STEP 7 .
The comparison illustrates the parameters you can edit:
● using
STEP 7
● using SFC 55 "WR_PARM"
● using SFB 53 "WRREC" (for GSD, for example).
Parameters set in
STEP 7 may also be transferred to the module using SFCs 56 and 57, and
SFB 53 (refer to the
STEP 7 ) Online Help).
Table 3-28 Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A
Programmable using ... Parameters Range of
values
Presetting Parameter
type
Scope Data record
number
SFC 55,
SFB 53
PG
Digital output Yes/no No Dynamic Channel 1 Yes Yes
See also
Parameters of SM 322; DO 8 x DC 24 V/0.5 A (Page 3-77)