Siemens Simatic S7-300 - Digital Output Module SM 322; DO 32 X 24 VDC; 0.5 A; (6 ES7322-1 BL00-0 AA0)

Digital modules
3.17 Digital output module SM 322; DO 32 x 24 VDC/ 0.5 A; (6ES7322-1BL00-0AA0)
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04
3-47
Technical data
Input current
• with "1" signal
120 V, 60 Hz
230 V, 50 Hz
typ. 7.5 mA
typ. 17.3 mA
Input delay
• at "0" to "1" transitions
• at "1" to "0" transitions
max. 25 ms
max. 25 ms
Input characteristics to IEC 61131, type 1
Connection of 2-wire BEROs supported
• Permissible quiescent current
max. 2 mA
Wiring signal transducers with 40-pin front connector
3.17 3.17 Digital output module SM 322; DO 32 x 24 VDC/ 0.5 A;
(6ES7322-1BL00-0AA0)
Order number
6ES7322-1BL00-0AA0
Properties
Properties of SM 322; DO 32 x DC 24 V/0.5 A:
● 32 outputs, electrically isolated in groups of 8
● Output current 0.5 A
● Rated load voltage 24 VDC
● suitable for solenoid valves, DC contactors and signal lamps
Use of the module with high-speed counters
Please note when using the module in combination with high-speed counters:
Note
When using a mechanical contact to switch on the 24-V power supply to SM 322; DO
32 x DC 24 V/0.5 A, its outputs will carry "1" signal for the duration of approx. 50 µs, due to
the circuit structure.