Siemens Simatic S7-300 - Table A-12 Smoothing Codes of SM 331; AI 8 X RTD

Parameter sets of signal modules
A.5 Parameters of analog input module SM 331; AI 8 x RTD
S7-300 Automation System Module data
A-18 Manual, 08/2006, A5E00105505-04
Temperature coefficient Code
Ni 0.006180 Ω/Ω/°C 2#1000
Ni 0.006720 Ω/Ω/°C 2#1001
0.005000 Ω/Ω/ °C (LG Ni 1000) 2#1010
Cu 0.004260 Ω/Ω/°C 2#1011
Cu 0.004270 Ω/Ω/°C 2#1100
Cu 0.004280 Ω/Ω/°C 2#1101
Smoothing function of SM 331; AI 8 x RTD
The table below lists all smoothing codes to be entered at the corresponding byte of data
record 128 (refer to the previous figure.)
Table A-12 Smoothing codes of SM 331; AI 8 x RTD
Smoothing Code
None 2#00
Low 2#01
Average 2#10
High 2#11
See also
Analog modules (Page 6-1)
Parameters of analog input modules (Page A-6)