Analog modules
6.11 Analog output module SM 332; AO 8 x 12 Bit; (6ES7332-5HF00-0AB0)
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04
6-103
Technical data
Voltages, currents, electrical potentials
Rated load voltage L+
• Reverse polarity protection
24 VDC
Yes
• Electrical isolation
• between channels and the backplane bus
• between channels and electronics power supply
• between channels
• between channels and load voltage L+
Yes
Yes
No
Yes
Permissible potential difference
• between S- and M
ANA
(CMV)
• between M
ANA
and M
internal
(V
ISO
)
3 VDC
75 VDC / 60 VAC
Isolation test voltage 500 VDC
Current consumption
• from the backplane bus
• from supply voltage L+ (no load)
max. 100 mA
max. 340 mA
Power loss of the module typ. 6.0 W
Formation of analog values
• Resolution, including sign
• ± 10 V; ± 20 mA; 4 mA to 20 mA; 1 V to 5 V
• 0 V to 10 V; 0 mA to 20 mA;
• Conversion time (per channel)
11 bits + sign
12 bits max. 0.8 ms
Settling time
• with resistive load
• with capacitive load
• with inductive load
0.2 ms
3.3 ms
0.5 ms (1 mH)
3.3 ms (10 mH)
Noise suppression, error limits
• Crosstalk between outputs
> 40 dB
Operational limit (across the temperature range, relative to output range)
• Voltage output
• Current output
± 0,5 %
± 0,6 %
Basic error limit (operational error limit at 25 °C, relative to output range)
• Output voltage
• Output current
• Temperature error (relative to output range)
• Linearity error (relative to output range)
• Repetition accuracy (in transient state at 25 °C, relative to
output range)
• Output ripple; bandwidth 0 kHz to 50 kHz (relative to output
range)
± 0,4 %
± 0,5 %
± 0.002 %/K
+ 0,05 %
± 0,05 %
± 0,05 %
Status, interrupts, diagnostics
Interrupts
• Diagnostic interrupt
programmable
To Next Page
Loading...
