Siemens SIMATIC - Page 53

Digital modules
3.1 Module overview
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
53
Table 3- 5 Digital output modules (continued)
Properties
Module
SM 322; DO 16 x
DC24V/0,5A High
Speed
(-1BH10-)
SM 322; DO 16 x
UC24/48 V
(-5GH00-)
SM 322; DO 16 x
AC120/230V/1A
(-1FH00-)
SM 322; DO 16 x
DC24V/0,5A
(-8BH00-)*
(-8BH01-) *
(-8BH10-)
SM 322; DO 8 x
DC24V/2A
(-1BF01-)
Number of outputs 16 DO; isolated in
groups of 8
16 DO; isolated in
groups of 1
16 DO; isolated in
groups of 8
16 DO; isolated in
groups of 4
8 DO; isolated in
groups of 4
Output current
0.5 A
0.5 A
1 A
0.5 A
2 A
Rated load voltage 24 V DC 24 to 48 V DC
24 to 48 V AC
120/230 V AC 24 V DC 24 V DC
Suitable for...
solenoid valves, DC contactors and signal lamps
Supports isochronous
mode
Yes no no no no
Programmable
diagnostics
No Yes no yes no
Diagnostic interrupt
no
Yes
No
Yes
No
Substitute value output
Yes
No
Special features Fast module;
especially for
isochronous
mode
- - Redundant load
control is sup-
ported; extensive
control functions
-