Siemens SIMOCODE pro PCS 7

Introduction
1.4 Supported control functions
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
13
Control functions and blocks
The table shows the control functions and the corresponding blocks with which the APL is
linked into the SIMOCODE pro PCS 7 Library V9.0.
Table 1- 2 Control functions and blocks
Control functions
APL blocks
Blocks from the
SIMOCODE pro Li-
brary
Overload relay
1
–
MMOprtn
MMDiag
MMMeas
MMStat
MMLog
Direct starter
Soft starter
Circuit breaker
Star-delta starter
MotL
Reversing starter
Star-delta reversing starter
Soft reversing starter
MotRevL
Dahlander
Pole-changing starter
MotSpdL
Valve
VlvL
Positioners 1–5
VlvMotL
Dahlander reversing starter
Pole-changing reversing starter
– MMRevDhl
MMOprtn
MMDiag
MMMeas
MMStat
MMLog
1
MMOprtn can be used for the overload relay control function without APL motor blocks.