Siemens SIMOCODE pro PCS 7

Description of the blocks
4.6 Block for timestamping MMLog
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
187
Message No.
Event
47
AM1 trip level 0/4–20 mA<
48 Stalled rotor
52
Number of starts >
56 External fault 1
57
External fault 2
58
External fault 3
59
External fault 4
60
External fault 5
61
External fault 6
64
Analog module open circuit
65
Test trip
66
DM-F safety-related tripping
67
DM-F wiring
68
DM-FL cross circuit
72
TM2 trip T>
73
TM2 sensor fault
74
TM2 Out of Range
80
AM2 trip level 0/4–20 mA>
81
AM2 trip level 0/4–20 mA<
88
AM2 open circuit
Note
In logbook view, text displays as
"Power - On" will contain the number of power ON
operations, reduced by 1.
DM-F events
When using DM-F Local and DM-F PROFIsafe fail-safe digital modules, the "Enabling circuit
closed" and "Enabling circuit open" events are saved.
Table 4- 83 Messages about events – MMLog
No.
Message No.
Event
1
200 or 202
Enabling circuit closed
2
201 or 203
Enabling circuit open