Siemens SIMOCODE pro PCS 7 User Manual

Parameter
A.5 Block parameter MMStat
SIMOCODE pro PCS 7 Library V9.0
266 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Output parameters for SIMOCODE pro PROFINET devices
Table A- 18 Output parameters MMStat – PROFINET devices
Parameter
Data format
Default setting
Meaning
Tmr5Act STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Tmr5Act Actual Value in sec
Tmr6Act STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Tmr6Act Actual Value in sec
Cnt5Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter5 Actual Value
Cnt6Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter6 Actual Value
CalMod3Out STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Calculation module 3 – Output
CalMod4Out STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Calculation module 4 – Output
AnaMulOut STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog Multiplexer – Output

Siemens SIMOCODE pro PCS 7 Specifications

General

Brand	Siemens
Model	SIMOCODE pro PCS 7
Category	Control Unit
Language	English