Siemens SINAMICS G120C Function Manual

Restriction with SINAMICS G120 Power Modules
You cannot use all of the integrated safety functions when using the following Power Modules:
Power Module Restriction
PM230 in degree of protec‐
tion IP55
Article numbers 6SL3223-0DE . . - . . A . :
The integrated safety functions are not possible.
Article numbers 6SL3223-0DE . . - . . G . :
The basic STO function is possible.
PM230 in degree of protec‐
tion IP20 and Push Through
Article numbers 6SL321 . -1NE . . - . . L . :
The integrated safety functions are not possible.
Article numbers 6SL321 . -1NE . . - . . G . :
The basic STO function is not possible.
Description
3.5 Restrictions when using safety functions
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 29

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating